Timelapse+ VIEW Intervalometer
The VIEW is an advanced intervalometer designed for high-end timelapse cinematography. Simply press start and let it automatically follow the changes in light from day to night and even back again, no need to fuss with settings or monitor it along the way. The results are significantly better and smoother than the camera's aperture priority mode since by analyzing each image it can achieve a proper exposure for the Milky Way even when ramping from noon sun, while at the same time ignoring sudden changes such as from headlights.
Designed for the field, you have 15+ hour run time with the rechargeable battery and can be used -40°C to +50°C. Have full control from the warmth of your tent through the iOS or android app. Tactile buttons and knob control gives you the freedom to use the VIEW with gloves on and for good measure, we also put in touch-free gesture control -- control with just wave of your hand.
The VIEW is able to synchronize with most motion control systems for shoot-move-shoot functionality. In addition, it has full motion programming support for the
Dynamic Perception NMX,
Syrp Genie Mini,
eMotimo Spectrum, and
MIOPS Capsule360. Photographing the Lunar Eclipse? The VIEW can
automatically follow the moon with compatible motion systems. It's ability to control the camera and motion control systems offers the best in next-level professional timelapse.
The creative edge for timelapse professionals
“…With the Timelapse VIEW+, the game changes completely. It's the ultimate Holy Grail time-lapse device. It changes exposure on its own, with precise and configurable intervals… Once the devices is set and the sequence is launched, you can pretty
much forget about it. Have a drink. Came back to the camera when the shoot is over, pack the gear and go home. I have several VIEW devices now, one for each camera. I never shoot Holy Grail time-lapses without them!”
Testimonials by Verified customersRead more Reviews...
This has simplified and improved my process when I do time lapses. Well worth the $ to save so much time and improve the end product.
Excellent product, does an amazing job with day to night transitions and Interfaces well with my Dynamic Perception gear. Elijah has provided stellar support when needed.
Remote Control via App
Besides being usable stand-alone, the VIEW can also be setup and monitored via a smartphone app, and even remotely over the internet when the VIEW is connected to WiFi. The app allows using liveview for motion keyframe setup as well as previewing the time-lapse while it's recording.Learn More
Keyframe Motion Programming
The VIEW can synchronize with most motion systems for shoot-move shoot functionality, and additionally allows full integration with Dynamic Perception's NMX controller and Syrp's Genie Mini for full motion programming, including multiple axes and keyframes.
With most Canon & Nikon DSLRs, as well as the Fuji X-T2, the VIEW is able to control the focus on AF lenses, and this can be programmed as keyframes to allow moving the focus to specific points during the time-lapse. Still somewhat experimental, results will vary between specific cameras and lenses.
With a compatible pan/tilt motion system, the VIEW is able to automatically follow the sun or the moon while maintaining a level horizon (as apposed to a polar aligned system). It can also be set to pan at a steady 15°/hour for polar alignment as well.
Solar Eclipse Programming
The VIEW can be programmed for preset exposures during each of the eclipse circumstances, with the timing calculated for the exact location. This allows you to enjoy the eclipse during the event but still capture everything as planned. Works great combined with the automatic sun tracking.
Does it work with my camera?
The VIEW Intervalometer connects to the camera via USB and currently supports most Canon and Nikon DSLRs, Sony Alpha Mirrorless such as the A7 series and A6000 series, Fuji X-T1 & X-T2, and Panasonic GH3, GH4, GH5 & G9. A complete list of specific models is planned but not available yet. See http://docs.view.tl/#camera-support-overview for more info.
Does it work with motion systems?
Yes, the VIEW Intervalometer can synchronize with any motion system that provides shoot-move-shoot functionality. The motion system's camera trigger port can be connected to the VIEW instead of the camera, and the camera then connected to the VIEW. The VIEW's interval mode is then set to external, so the motion system controls the interval and motion, while the VIEW handles the exposure ramping. Alternately, if the motion system supports an external intervalometer, the VIEW can send the signal to the motion system for when to move. This allows the interval to be controlled by the VIEW making a variable interval possible.
Also, the VIEW can fully integrate with the Dynamic Perception NMX motion controller as well as the Syrp Genie Mini. Motion control (including keyframes) can be configured with the VIEW app. Learn more about motion control
with the VIEW here: http://docs.view.tl/#motion-controlWhy do I need this?
What's required for post-processing?
As the VIEW changes the exposure for ramping, the changes are made using the given shutter speeds on the camera (1/3 stop steps). This causes stepping in the brightness of the time-lapse which can be perceived as flicker and needs correction in post processing. (Finer changes in exposure would be possible if the VIEW adjusted it with the camera in Bulb mode, but this hasn't been implemented yet.)
There are several ways eliminate flicker, but most require Adobe Photoshop Lightroom. Although it isn't necessary, the user can use the XMP file generated by the VIEW in post -processing, which has exposure correction data for each photo,
In the future I plan to add Darktable support. There have been many requests for Capture One, but due to their limited support for third party integrations, this likely won’t be possible. The easiest method is with the Timelapse+ STUDIO LightRoom Plugin, free for VIEW users. More info on post-processing is available here: http://docs.view.tl/#post-processing
Can the VIEW be powered while in use?
Yes, the VIEW can be charged/powered during use. The VIEW can last from 15 to 30 hours of continuous use with the internal battery, and can be powered by any USB power source. This allows for hot swapping external USB power packs as well. If the external power is disconnected or runs out, the VIEW will automatically switch to it's internal battery.
What cables or accessories do I need?
The VIEW includes a USB cable for connecting the camera according to the camera model specified during checkout. No other accessories or cables are needed, although for motion system synchronization you may want a 2.5mm TRS cable. If you have more than one type of camera you plan to use it with, you can purchase additional USB cables as needed.
The VIEW package includes the VIEW Intervalometer, a micro-b USB charging cable, a USB cable for the camera, a small microfiber pouch and quick-start card. A charger is not included. However, you can use any USB source to charge
or power the VIEW.How do Timelapse+ VIEW Intervalometer users register the plugin?
60 days money back guarantee!